To order your Seaview Windshield Insert today, please follow these four simple steps:

STEP 1: DETERMINE YOU ACTUAL VISUAL AREA
When choosing the right size Windshield Insert to install, keep in mind it is not necessary to fill the whole space with the product. First determine what your actual visual area is. On most boats, the Windshield Insert should be placed as low on the panel as possible as the bow of the boat usually rises when under way.

STEP 2: CHOOSE YOUR WINDSHIELD INSERT SIZE
Measure the vinyl window opening on the panel you wish to install the Windshield Insert, then choose one of our stock sizes that best covers the area (Important: all stock sizes are listed width x height). When choosing a size that will completely fill the clear space, please leave at least one inch of space around the outside of the Windshield Insert's frame. Please note: A custom size Windshield Insert can be ordered if one of the available stock sizes does not match your opening.

STEP 3: FOR BOATS EQUIPPED WITH A SMILEY
< Click to See Smiley
If the panel you wish to install the Windshield Insert into has an inner zipper area that unzips and opens for ventilation (commonly called a smiley), you need to determine whether to install the product within the smiley section or not. Consider your visibility - the zippers, smiley zippers and the Windshield Insert's frame may look cluttered and reduce your overall visibility. The smiley also may reduce the size of the Windshield Insert you can install. The solution is to have your boat top company remove the smiley section and replace it with a clear vinyl section, then install your Windshield Insert. If the clear vinyl of the panel you are installing your Windshield Insert into has to be replaced for any reason, we strongly recommend using at least a 40 gauge vinyl.

STEP 4: PLACE YOUR ORDER BY PHONE, FAX OR EMAIL
Once you have the information you need from following the steps above, you are ready to order your Seaview Windshield Insert. Call 281.841.2501 or fax 281.332.5453 or email your request and information to seaviewinserts@aol.com.