INSTALLING WINDOW WASHER
| PARTS |
| 1 - Washer Bottle With Motor |
| 1 - 2-Pin Connectors |
| 2 - Female Wipe Connectors |
| 1 - Quick Release Fitting |
| 1 - 15ft Water Hose |
1. Connect supplied water hose to brass fitting on Seaview Windshield
Insert.
2. Run water hose along channel in frame edge to desired location.
HELPFUL HINT: To secure water hose in channel, wrap a few layers
of electrician's tape around hose to help hold in channel.
SUGGESTION: Water hose can be run through S/S pipe to dash.
3. Drill 1/4" hole in dash in desired location. Cut water
hose at dash and install quick release fitting above dash.
4. Install water tank, attach hose and wire to switch.
|
